Combustion System Multi-Fuel Boiler Burner For Industrial Furnace
DS/2 LBU Series
The output range of the DS/2 BLU series burner is 44-2400- Kilo Watts, suitable for low and medium-temperature hot water boilers, hot water or steam boiler, and heat conduction oil furnace.
The running mode of this burner is a smooth two-stage fire, or you can install a PID Proportional adjuster and a probe to get the proportion regulation mode. This series burner can reach a high running level in all applied fields, and lower fuel consumption and running costs. The special design makes the burner small, and easy to use and maintain. Its special air conduit circuit and multiple optional accessories parts improve the flexibility of working.
| DS25 BLU |
45/125 ÷ 370kW |
| DS35 BLU |
72/202 ÷ 480kW |
| DS45 BLU |
90/190 ÷ 550kW |
| DS68 BLU |
150/350 ÷ 860kW |
| DS120 BLU |
300/600 ÷ 1300kW |
| DS160 BLU |
300/930 ÷ 1860kW |
| DS200 BLU |
570/1375 ÷ 2400kW |
DS series burner heads of different lengths can be optioned by the thickness of the boiler fore plate and boiler type.
Depending on the type of boiler, check if the depth installed in the combustion chamber is correct.
The burner's inner parts can be adjusted by regulating the screws fixed on the flange to reach maximum output.
Gas valve group
The burner is equipped with a butterfly valve to adjust fuel delivery, controlled by a motor with variable line CAM.
Fuel can be supplied from the left or the right of the burner. If the pressure of the fuel gas supply pipe ( parts of DS 25-45/2) is too
high, the largest gas pressure switch will stop the burner.
The required gas valve can be optioned according to the gas output and pressure of the supply pipeline.
Audited Supplier 
){kind=link}