Combustion head
TB series burners can choose different lengths of combustion heads according to the boiler model and the thickness of the boiler front door. According to the different types of generators, choose the correct length of the combustion head to penetrate the furnace gap.
Hydraulic circuit example (mechanical atomization)
The oil circuit system of the TB series mainly has two parts. The first part is on the body, including emergency safety devices and adjustment units. The second part is independent of the burner and consists of an oil pump. The variable profile cam simultaneously adjusts the ratio of fuel volume and air volume to ensure that the burner can maintain high combustion efficiency throughout the conforming area.
Factory Direct Supply Oil Gas and Dual Fuel Combustion Burner
High Power Middle Range Light Indoor Combustion Burner
It has features as below:
1. Models available with different burner controllers
2. High efficiency fan ventilation system (HPV) allowing easy burner-boiler matching even with high combustion chamber pressure
3. Combustion head easy to assemble and adjust
4. The hinge flange allows easy access to the combustion head without losing the original settings
5.All models are available to work with fifty and sixty Hz electrical frequency
6. Combustion is sufficient, high thermal power efficiency
7. Optional two-stage fire model, high safety performance. When starting, the burner will burn with small fire first, and then switch to large fire without causing deflagration.
8. Strong fuel adaptability. The burner only needs to replace a few parts to be suitable for natural gas, liquefied petroleum gas, coal gas and other types of gas.
9. The combustion status is detected by the flame monitoring system. When there is a combustion failure, the control system will issue an instruction. The solenoid valve of the air supply system will quickly close, cut off the gas and power, and indicate the failure.
10. The unique flame stabilizing disk design generates rotating airflow, which helps the air and gas to fully mix and improves combustion efficiency.
Pre-sales Service
· Arrange professional salesmen to contact with customers timely, and understand the needs of customers preliminary.
· According to customer needs to provide professional technical support, but also canprovide video quidance and simulated experiment;
· Based on the final actual conditions to provide the best technical parameters and select the best pump type.
After-sale Service
· Once the salesman receives the customers feedback, communicate and provide the best solution timely.
· When the customer's improper operation causes the problems, the salesman should inform the customer correct use method timely;
· Salesman mail return to visits regularly and ensure every customer will satisfaction.
){kind=link}